Barrel for Glock 22/31 Gen 5 9x19 incl. CIP

Product No.:: L-22B-P919-S114 CIP
Shipping time:: in stock (see shipping)
Stock:: pieces
Inner Profile:: IGB Polygonal
Caliber::: 9 x 19 (Caliberchange)
for Pistole::: Glock 22 / 31 GEN 5
CIP Proof Mark:: Included
Barrel length::: Standard

303,00 EUR

incl. 20% tax

Add to wish list

Ask about product

Description

Description

Caliberchange, which magazin?
Caliberchange from .40S&W or .357Sig to 9x19 you can use the original 9mm-Magazin from the Glock 17 or 19. The recuperator spring is the same, as is the ejector and the extractor .

General information:
IGB Caliberchange barrels do not require any changes to your gun.You may only change the magazine to a magazine fitting the caliber for feeding. Eg.: If you switch from 40 S&W to .357 Sig, no magazine change is required. If you switch from 40 S&W to 9x19, you'll need a 9x19 magazine for proper feeding and storing of the ammunition. No magazine change for 7.65para, you can continui to use your 9x19 magazine.
When in doubt, you can also order a magazine fitting your order from us at IGB Austria.
Sometimes, when switching from a stronger caliber to a weaker one, like .357 Sig to 9x19, it is advised to replace the OEM recoilspring with an IGB one, which you can find in accessories or by clicking here.

The IGB Polygon Profil Design:
The internal barrel profile does not have sharp edges (lands/grooves), but instead features smooth, rounded transitions. These gentle curves slightly deform the bullet and create a better gas seal, which results in increased muzzle velocity

Advantages:

Often delivers higher muzzle velocities (5–15% more, depending on the load)
Can be more accurate with jacketed bullets due to more consistent bore contact and reduced deformation
Glock shooters often praise the accuracy of polygonal barrels, especially with calibers like .357 SIG or 10mm.Less lead fouling, since there are no sharp edges where lead can build up.
Easier to clean thanks to the smoother profile
Longer barrel life, as there are no sharp edges to wear down

CIP Proof Mark, what is this?
CIP Proofing is the proof against a certain pressure inside the barrel. These markings are mandatory in certain countries like; Belgium, Chile, Germany, Finland, France, Great Britain, Italy, Austria, Russia, Slowakia,Spain, Czech Republic, Hungary and the Emirates

Manufacturer Information:
IGB Austria manufactures barrels from steel block to finished product and is Europes largest pistol barrel manufacturer. Being independent of any blank supply, IGB Austria chooses the finest steel for pistol barrels. In terms of Glock Pistols, IGB Austria offers barrels for any Glock, for any Generation, in any length and exports those in-house produced barrels worldwide.

Warranty:
Every IGB barrel is sold with a warranty to last up to 75 000 rounds if used with factory ammunition according to the C.I.P. or SAAMI standards.

Please note:
This product is not subject to free trade. Please see & read our General Terms of Business.